Wood cabinet speaker
surround sound systems speaker black
3 way speaker
发现 OLYMPICA CENTER

Olympica Center.

+ Wishlist


奥林匹克剧院:这是设计、规划、协调、均衡、音质、敏感、探索美、奇迹、材料专业处理、激情等等的代名词。这是大师级总建筑师安德烈亚•帕拉弟奥的最伟大工程之一,是在其有生之年赠送给维琴察的一件永久礼物,这是一件为维琴察锦上添花的珍宝,也是美丽与创造力的典型例证。所有人都可感知到其中的真实价值与示范价值,并会向这一辉煌的建筑物表达其敬意。Sonus faber正是诞生自这一美丽而丰饶的土地上,从一开始就借鉴、学习与这片土地密不可分的历史,并将所学运用到乐器中,与城市以及激发灵感的艺术品之间产生共鸣。作为向安德烈亚•帕拉弟奥在此留下的唯一遗迹奥林匹克剧院的致敬,Sonus faber决定创建Sonus faber Olympica。奥林匹克剧院是音乐之声展现几何乐趣的殿堂,是声音完美无缺扩散的容器,也是音效加强的精确参考模型。

Sonus faber希望创建一系列富有内涵的扬声器,同时可唤起产品中贯穿的可见并可触及的感情。因此,木材、皮革、谨慎与热情生产中蕴含的无限工艺价值,让每一个人都能理解自身对作品与音乐诚挚的爱。Sonus faber Olympica项目采用新系列的无源音响扬声器,这一产品会添加到Arcugnano工厂的现有目录中,在美观方面采用两款Sonus faber标志性的庄重材料——胡桃木与皮革。新系列产品的推出将分成两个阶段,第一阶段包括三种型号Olympica I(二路书架式),Olympica II(三路落地式)和Olympica III(三路落地支架式),这些产品已在2013年5月9日-12日举办的声名卓著的慕尼黑贸易展上展出,而奥林匹克剧院已在2013年9月亮相。通过这一新项目,Sonus faber能够以平衡方式统一我们经典的风格,并引入技术创新带来的重要元件,因此可将现代气息与Sonus faber的古典风格合并在一起。实现这一点应归功于Paolo Tezzon与Livio Cucuzza领导的研发部门的广泛团队合作以及人力和资源方面的显著进步。新诞生的Sonus faber Olympica系列也代表了借助Vicenza的外壳向客户提供一系列型号的愿望,借此,每个人都能找到用途(双音轨或家庭影院)与空间(各种尺寸的书架式或落地式)的正确解决方案,并且依然确保继承Sonus faber在材料应用、设计特征、性能等质量水平以及专为乐器设计并且完全在意大利制造的扬声器的独有魅力。


Features

  • 音箱

    音箱采用天然胡桃木,顶层与底层为实心胡桃木,接头为整洁的枫木,采用胡桃木饰面、更传统的黑色枫木或者石墨饰面。外形是旗舰产品Aida的经验与经典竖琴外形结合的产物。最重要的差别在于Sonus faber首次引入的剖面特殊不对称性。

  • 铝制底座

    书架式型号得益于特殊阳极氧化铝底座(从Guarneri型号演化而来),允许扬声器获得正确的倾斜度,并且同落地式型号一样配备可调不锈钢脚垫,确保稳定性与可靠性。

  • 反射

    最后也是最主要的美观要点是垂直设计的侧反射端口的异常位置与几何形状,并在长出口附近采用穿孔金属板进行装饰。

  • 高音扬声器/中音扬声器

    29mm球顶高音扬声器采用了来自Aida的DAD工艺以及钕磁铁;80mm中音扬声器的振盆采用纤维素、木丝棉和洋麻的混合膜

  • WOOFER

    150 mm Woofer with a cone made up of a sandwich of cellulose pulp membranes and rigid syntactic foam.

技术规格

before

SYSTEM 

3 way floorstanding, paralaminar “stealth ultraflex” vented loudspeaker.



CABINET

Enhanced “Lyre” shape design, progressive thickness triple curvature cabinet walls damped spread resonance spectrum system. Solid walnut vertical clamps.



TWEETER
Sonus faber “Arrow Point” DAD (Damped Apex Dome, synthesis of the classic dome and ring transducer) 29XTR2. A Sonus faber designed 29 mm moving coil driver. The ultra dynamic linearity is given by the new Neodymium motor system.


MIDRANGE

Sonus faber M8XTR. A Sonus faber designed 80 mm ultra dynamic linearity midwoofer. CCAW wire is used on a controlled “eddy current free” voice coil. The dynamically linear magnetic field motor has a focused field geometry. A special custom diaphragm is made with a blend of traditional cellulose pulp, kapok, kenaf and other natural fibers, developed according to the most natural sound. To further inhibit any residual cone coloration we are using a transparent viscous surface damping coating. A special coaxial anti-compressor is used, designed to remove cavity resonance and distortions.



WOOFERS
Sonus faber W15XTR. A totally Sonus faber designed 150 mm ultra dynamic linearity woofer. CCAW wire is used on a composite former “eddy current free” voice coil. The dynamically linear magnetic field motor incorporates triple Kellog/Goeller rings. A special custom diaphragm is made with a real time air dried non pressed blend of traditional cellulose pulp, kapok, kenaf and other natural fibers, developed according to the most natural sound. To further inhibit any residual cone coloration we are using a transparent viscous surface damping coating.

CROSS-OVER

Non-resonant “progressive slope” design, optimized amplitude/phase response for optimal space/time performance. “Paracross topology” on both tweeter hi-pass and midrange band pass, cross-over points 250 Hz - 2.500 Hz. Highest quality components are used including Mundorf Evo Oil capacitors and Jantzen inductors.

FREQUENCY RESPONSE

50 Hz – 30.000 Hz, tuning port included.

SENSITIVITY

88 dB SPL (2.83 V/1m).

NOMINAL IMPEDANCE 

4 ohm.

SUGGESTED AMPLIFIER POWER OUTPUT
50W – 300W, without clipping.

LONG-TERM MAXIMUM INPUT VOLTAGE (IEC-268-5)

22V rms.


DIMENSIONS 

230 x 649 x 353 mm (HxWxD).

OPTIONAL DEDICATED STAND

443 x 438 x 310 mm (HxWxD).



WEIGHT

17 kg Net

在售成品

  • Walnut

  • Piano Black

找到经销商

Sonus Faber通过遍布全球的独家分销商和特许经销商网络分销产品

搜索›